Buderus Logamatic 4211 - Automatic Maintenance Message

Extended functions
7
Logamatic 4211 - Subject to technical modifications.
49
7.21 Automatic maintenance message
If your heating contractor has (with your agreement) enabled the "automatic
maintenance message", the maintenance message "Note maint. message" is
displayed at a predetermined time (on a particular date or after so many hours
run).
z Open flap.
Turn the rotary selector.
You will see either "maint. after Date required" or "maint. after Hours run
required".
z Notify your heating contractor to schedule the inspection and maintenance
work.
Where fitted, the Logamatic telecontrol system enables the maintenance
message to be transmitted automatically to your mobile, PC or fax machine.
Note
Maint. message
Note
maint. message
maint. after
required
Date
maint. after
required
Hours run
USER INFORMATION
The automatic maintenance message remains active until it is reset by your
heating contractor.