Buderus Logamatic 4211 User Manual

Standard functions
6
Logamatic 4211 - Subject to technical modifications.
24
6.5.2 Heating DHW once
If the "DHW" LED illuminates, only a limited amount of hot water remains in the
cylinder. Should you require a larger amount of DHW, proceed as follows:
Press "DHW".
The "DHW" LED flashes, and heating DHW once commences.
Subject to the size of the DHW cylinder and the boiler output, DHW will be
available after approximately 10 to 30 minutes. With instantaneous water
heaters or combination boilers, DHW is available almost immediately.
DHW
Reheating
actual 55°C

Buderus Logamatic 4211 Specifications

General

Brand	Buderus
Model	Logamatic 4211
Category	Control Unit
Language	English