Logamatic EMS – 6 720 801 386 2011/05
41
Operation with the user menu
5
– Individual heating circuits: only heating circuits which are not assigned to the RC35 will be
displayed; in other words, those which have their own remote control unit or which have no
remote control unit.
4. Setting at home or away from home (absent):
– Absent: heating is operated at a reduced, adjustable holiday temperature (reduced mode).
If “complete system” was previously selected, DHW and DHW circulation are switched off.
If only some heating circuits are in holiday mode, DHW heating and DHW circulation remain
active (Æ Tab. 14, page 42).
– At home: heating and DHW are available every day as on a normal Saturday.
5. Set the year, month and day, one after the other, for the first day of the holiday period.
The holiday mode begins at 0:00 hours on the first day.
6. Press . The year starts flashing.
7. Setting year: Hold the button pressed down and simultaneously turn the rotary selector.
8. Release button. The year is saved.
9. Repeat steps 6 to 8 to set the month and day.
The start date of the holiday period has now been set.
10. Turn the rotary selector to the right to set the end date of the holiday.
11. Set the end date of the holiday period by following steps 6 to 9.
12. In addition under absent only: turn the rotary selector to the right to set the temperature for
the holiday period (basic setting: 17 °C).
The holiday mode is now fully set.
13. Close the flap to finalise your settings.
During the holiday period, the end date is displayed when the flap is open.
If you want to exit the holiday mode early:
B Open user menu\holiday again.
B Answer the question Do you wish to end the holiday function? with yes.
To ensure that your home is warm when you return, set under absent the first day for
normal operation (date of arrival) as the end date.
Under at home set the last day of your holiday as the end date.
During the time of the absent holiday mode you can change the temperature simply by
turning the rotary selector. The flap must be closed when you do so.
To Next Page
Loading...
Need help?
General
