General information1
Logamax plus GB162-80 kW/100 kW - Subject to modifications resulting from technical improvements!6
1 General information
About these instructions
These Installation Instructions contain important information
for the safe and professional installation, start-up and main-
tenance of the boiler with boiler input rating of 80 kW and
100 kW.
These Installation Instructions are intended for professional
installers, who have the necessary training and experience
for working on heating and gas systems.
Cascade installation
Special cascade units (accessories) have been developed
to enable this boiler to be installed in a cascade system.
Every cascade unit includes an installation frame, horizontal
headers, connection pipes for the boiler, main gas pipe and
a vertical low loss header.
Cascade units are available for installing the boilers inline or
back-to-back. These cascade units make installing a
cascade system easier and less labor intensive.
Please contact Buderus for further information about
cascade systems.
Updating of documentation
The following technical documentation is available for the
Logamax plus GB162-80 kW/100 kW:
– Installation instructions
– User’s manual
– Service manual.
Please contact us if you have any suggestions for improve-
ment or corrections.
Subject to technical modifications
Slight changes may be made without prior notice to the illus-
trations, process steps and technical data as a result of our
policy of continuous improvement.
GB162 Natural Gas Propane Gas
80 kW 290,000 btu/hr 270,000 btu/hr
100 kW 333,000 btu/hr 315,000 btu/hr
Table 1 max. input rate
To Next Page
Loading...
