Inspection11
Logamax plus GB162-80 kW/100 kW - Subject to modifications resulting from technical improvements!64
11.5 Measure the gas inlet pressure (working pressure)
See paragraph 9.7: "Measure the gas inlet pressure
(working pressure)" on page 50.
11.6 Check and adjust the gas/air ratio
See paragraph 9.8: "Check and adjust the gas/air ratio" on
page 52
11.7 Carry out a leakage test in operating conditions
See paragraph 9.9: "Carry out a leakage test in operating
conditions" on page 54.
11.8 Measure the flue gases CO emissions
See paragraph 9.10: "Measure the flue gases CO emis-
sions" on page 55.
11.9 Fill the heating system
To ensure a trouble free operation of your boiler you must to
check the pH-value every year and correct if necessary.
See accompanying manual about water quality for more
information.
See paragraph 9.2: "Fill the heating system" on page 47.
11.10 Check the air/flue gas connection
See paragraph 9.5: "Check the air/flue gas connection" on
page 49.
To Next Page
Loading...
