47
We reserve the right to make any changes due to technical modifications.
Installation and maintenance instructions Logano GE315 • Issue 02/2006
6Maintenance
Demand-dependent maintenance work
Page
(individual steps)
Comments
1. System shutdown page 38
2. Remove and clean the hot gas baffle plates page 41
3. Clean the hot gas flues (heating surfaces) page 42
4. Clean the combustion chamber page 42
5. Clean the flue gas collector page 42
6. Install the hot gas baffle plates page 22
7.
Check and, if required, replace gaskets/packing cord on
burner and burner door
See burner documentation
8. System start-up page 33
9.
Final check of the maintenance work; document the
measurement and test results
See burner documentation
10. Check the function and safety in operation See burner documentation
Confirm the professional maintenance with signature, date and company stamp
To Next Page
Loading...
Need help?
General