Buffalo TeraStation - Using RAID 5 mode (4 hard drives)

TeraStation User Manual 20
Using Normal mode
1
2
Click [Delete RAID Array].3
When the [RAID Array operation] window opens, click [Apply].4
The [Conrm Operation] screen will appear. 5
Enter the number shown in the [Conrmation Number] eld within 60 seconds, and click [Apply].
Follow the instructions displayed on the screen.6
You have now set up Normal mode. Refer to page 43 to create a shared folder.
Select the array you want to congure.
[Conrm Operation] screen
When you perform any of the following tasks, a [Conrm Operation] screen is displayed . To
continue, enter the displayed number within 60 seconds and click [Apply].
Changing structures of RAID array (Create/Delete)•
Delete Folder•
TeraStation’s Restore Factory Defaults•
Format TeraStation•
Empty recycle bin of each folder•
Format Array or Disk•
Remove Disk•
Rebuild RAID array•
Congure hot spare•
Congure normal mode•
[Conrm Operation]
Screen
Click [System] - [Storage] - [RAID Array] in the Web Admin interface.