Buffalo TeraStation - Configuring a Hot Spare

TeraStation User Manual 25
Using RAID 0 mode
Change system to normal mode (page 20).1
2
3
4
5
The [Conrm Operation] screen will appear. Enter the number shown in the [Conrmation Number] eld within 6
60 seconds, then click [Apply].
Follow the instructions displayed on the screen.7
You have set up a RAID 0 array. Turn to page 43 to create a shared folder.
Click the array you want to congure.
Select all available hard drives.
Select [RAID 0].1
Click [Create Raid Array].2
Click [System] - [Storage] - [RAID Array] in the Web Admin interface.