Buffalo TeraStation - Extensions; Using WebAccess

TeraStation User Manual 76
To congure port trunking,
Connect LAN Port 1 on the TeraStation to a port on the switch.1 Do not connect LAN Port 2 yet.
In the Web Admin interface, navigate to [Network] - [Settings] - [Port Trunking]. 2
Under [Port Trunking], click on [Modify Setiings].3
Connect LAN Port 2 on the TeraStation to the switch.4
Hold down the TeraStation's power button for 3 seconds to turn it o. P ress it again to restart the TeraStation. 5
Port Trunking is now congured.