Burkert 1062 - Assembly; Assembly Safety Instructions

16

English
Assembly


Thedevicemustonlybeassembledbyqualifiedandskilledstaff•
withtheappropriatetools.


Avoidunintentionalactivationoftheinstallation.•
Guaranteeasetorcontrolledrestartingoftheprocesssubse-•
quenttotheassemblyofthedevice.
 


Whenthe1062isusedinanATEX21or22zone,makesure:
Thatthecoveroftheelectricalpositionfeedbackisalways•
screwedshutbeforeoperatingthevalve.


Shutdownthepneumaticpowersourceanddepressurisethe•
pipesbeforecarryingoutworkonthedevice.

Beforestartingwork,switchoffthepowersupplyandsecureit•
topreventrestarting.
Observeallapplicableaccidentprotectionandsafetyregula-•
tionsforelectricalequipment.