6
Basic safety information
Type 8202/8222
3. BASIC SAFETY INFORMATION
This safety information does not take into account:
• any contingencies or occurrences that may arise during assembly,
use and maintenance of the device.
• the local safety regulations that the operator must ensure the staff
in charge of installation and maintenance observe.
Danger due to high pressure in the installation.
Danger due to electrical voltage.
Danger due to high fluid temperatures.
Danger due to the nature of the fluid.
Various dangerous situations.
To avoid injury take care:
• to prevent any unintentional power supply switch-on.
• to carry out installation and maintenance by qualified and skilled
staff with the appropriate tools.
• to guarantee a set or controlled restarting of the process after a
power supply interruption.
• to use the device only if in perfect working order and in com-
pliance with the instructions provided in the user manual.
• to observe the general technical rules during the planning and
use of the device.
Various dangerous situations.
To avoid injury take care:
• not to use the transmitter type 8202 or 8222 in potentially
explosive atmospheres.
• not to use this device in an environment incompatible with the
materials from which it is made.
• not to use fluid that is incompatible with the materials of which
the transmitter is made.
• not to subject the device to mechanical loads (e.g. by placing
objects on top of it or by using it as a step).
• not to make any external modifications to the device. Do not
paint or varnish any part of the device.
English
To Next Page
Loading...
Need help?
General
