42
Adjustment and start-up
System
Code 0*** Confirm code
Test
PVar:
Value:
Sensor
INPUT
Outputs
AC2:
AC1: INPUT
INPUT
TR1: OFF/ON
TR2: OFF/ON
Info Error
MESSAGE
MESSAGEWarning
Software
MESSAGEMainten.
MESSAGESmiley
CondS
TDSppm
TempC
TempF
CondR
Main
Sensor
READ
READ
0***
MESSAGEProduct
9.11 Knowing the Parameters Menu
9.11.1 Transferring data from one device to another
See chpt. 9.9 to access the Parameters menu.
This function is only possible with a display module with software version V2.
→ On the device, check the software version in the menu "Info -> Software -> Main".
• The software version of the display module is displayed when the display module is powered up.
• Function "DOWNLOAD" is only present if an "UPLOAD" has been successfully carried out.
• Never interrupt a data transfer else the device could be damaged.
The compensation curve determined with the function TEACH SPECIAL cannot be transferred to another
device. Refer to chpt. 9.12.4.
English
Type 8222 ELEMENT
To Next Page
Loading...
