6
About the Operating Instructions
1 ABOUT THE OPERATING INSTRUCTIONS
The Operating Instructions describe the entire lifecycle of the device. Please keep the Operating Instructions in a
safe place, accessible to all users and any new owners.
The Operating Instructions contains important safety information.
Failure to comply with these instructions can lead to hazardous situations.
▶ Irrespective of the device variant, read the Operating Instructions. If you do not understand the content of the
Operating Instructions then contact Bürkert.
1.1 Definition of the word “device”
The word “device” used within these Operating Instructions refers to the Type 8222 ELEMENT conductivity meter.
1.2 Validity of the Operating Instructions
The Operating Instructions are valid for the Type 8222 ELEMENT conductivity meter, version V2.
Mention V2 is given on the device Type-label. Refer to chpt. 5.4.
1.3 Symbols used
danger
Warns you against an imminent danger.
▶ Failure to observe this warning can result in death or in serious injury.
Warning
Warns you against a potentially dangerous situation.
▶ Failure to observe this warning can result in serious injury or even death.
caution
Warns you against a possible risk.
▶ Failure to observe this warning can result in substantial or minor injuries.
notice
Warns against material damage.
Advice or important recommendations.
Refers to information contained in the Operating Instructions or in other documents.
English
Type 8222 ELEMENT
To Next Page
Loading...
