To Next PageTo Next Page
Need help?Do you have a question about the BWT COVERDECK and is the answer not in the manual?
General| Brand | BWT |
|---|---|
| Model | COVERDECK |
| Category | Lighting Equipment |
| Language | English |
Essential safety practices for cover operation, child protection, and vigilance.
List of critical emergency numbers for pool safety incidents.
Specifies maximum cover size and the required ground fault circuit breaker.
Details steps for preparing the pool edge and positioning installation components.
Instructions for setting the water level regulator based on coping height for optimal function.
Guidelines for positioning the overflow to manage water evacuation effectively.
Step-by-step guide for assembling the reduction gear and pulley components.
Instructions for mounting the motor onto the end fixing plate and attaching sub-coping plates.
Guides for safely submerging the cover mechanism and securing the axle in place.
Covers final assembly steps, drilling, and making electrical connections within the control box.
Explains electrical diagrams, essential wiring requirements, and critical safety warnings.
Detailed illustration of the control system wiring, including PLC and sensors.
Diagram showing the electrical power supply, transformer, and distribution for the system.
Comprehensive list of all components required for the control panel assembly.
Step-by-step instructions for the initial stages of control panel assembly.
Completes control panel assembly, including drilling, mounting, and final wiring connections.
Introduces the PLC display and the initial steps for programming cover travel limits.
Guides on choosing the motor position and verifying correct axle rotation direction.
Instructions for saving the pool's fully open and closed cover positions.
Provides solutions for common problems during axle rotation setup.
Explains how to confirm correct operation and interpret PLC screen messages.
Details specific error codes and their corresponding troubleshooting steps.
Instructions on how to operate the cover to open and close the pool.
Guidelines for motor maintenance, winter storage, and replacement instructions.
Details the assembly of the attachment kit and coverdeck beam components.
Explains the assembly for pit wall installations, focusing on bracket insertion.
Step-by-step illustration of the pit wall assembly process for the left-hand side.
Provides key dimensions and configuration details for pit wall mounting scenarios.
Outlines dimensions and configurations for separating wall installations.
Details dimensions for separating wall installations with Stardeck cement-bedded units.
Provides dimensions for pit wall installations involving Stardeck cement-bedded units.
Details dimensions for pit wall installations using sub-coping mounting plates.
Outlines key dimensions for assemblies utilizing a duckboarding support angle.
Lists required spare parts and provides a guide for regular system inspections.
