BWT Perla one - How Safety Instructions are Displayed; Product-Specific Safety Instructions

6
EN
1.6 How safety instructions are
displayed
In this document safety instructions precede any
sequence of actions that could cause harm to per-
sons or damage to property. All hazard prevention
measures must be followed.
Safety instructions are displayed as follows:
SIGNAL WORD!
Source of hazard
(e.g. electric shock)
Type of hazard (e.g. risk of fatal
injury)!
 Escape or prevent hazard
 Rescue measure (optional)
Signal word / colour Indicates the severity of
the hazard
Warning symbol Calls attention to the
hazard
Source / type of
hazard
Indicates the type and
the source of the hazard
Consequences of
hazard
Explains the conse-
quences of not following
the safety instructions
Hazard prevention
measure
Explains how to avoid
the hazard
Signal word Colour Severity of the hazard
DANGER
High-risk hazard.
Indicates a hazardous
situation which, if not
avoided, will result in
death or serious injury.
WARNING
Hazard with a mod-
erate degree of risk.
Indicates a hazardous
situation which, if not
avoided, could result in
death or serious injury.
CAUTION
Low-risk hazard.
Indicates a hazardous
situation which, if not
avoided, may result
in minor or moderate
injury.
1.7 Product-specic safety
instructions
DANGER!
Mains voltage!
Risk of death by electric shock!
 Unplug device before any service and
repair work.
 If the mains cable of the unit becomes
damaged, you must replace it with an
original BWT cable.
       
     
perform certain safety-relevant actions on the
device.