Children should sit comfortably and
safely. Make sure that the child restraint is
positioned, mounted, and used correctly.
Important considerations for selecting
a child restraint
●
The child restraint is the correct type
and size for the child.
●
The child restraint is the correct type
and size for the seating position.
●
The child restraint must be
homologated by ECE R44/ECE R129.
Passenger airbag switch
●
The switch is located on the front
passenger side of the dashboard and is
accessible when the passenger's door
is open.
●
See
P74
for details.
WARNING
●
Never install a rear-facing child
restraint on the front passenger
seat if the airbag is activated.
Child Restraint System Anchorages
Front passenger seat
●
The front passenger seat is equipped
with the ISOFIX/i-Size anchorage. The
anchorage locations are identified by
a marking (see illustration) located
on the seatback, directly above the
associated anchorages.
●
The front passenger seat is equipped
with tether strap anchorages on the
back.
WARNING
●
Where applicable to use a top
tether strap with the child
restraint system, ensure the strap
is routed through the hole in
the head support before attaching
and tensioning the strap to the
anchorage point at the base of the
seat.
Rear outboard seat
●
The anchorage is provided on the
rear outboard seat, and it will
only be visible after pressing its
decorative cover (the label showing the
anchorage is attached to the seat).
24
To Next Page
Loading...
