●
Anchor supports (for the top tether)
are provided at the rear outboard seat.
CAUTION
●
Secure the top tether when
installing the CRS.
Installing Child Restraint Systems
Precautions
① Do not turn the anchorage lever trim
cover outward.
② Push the anchorage lever trim cover
inward in use.
③ Press the upper part of anchorage lever
trim cover to reset after use.
Installing child restraint systems:
1.
Open the anchorage lever trim cover
and install the child restraint system to
the seat.
REMINDER
●
The anchorage lever is located on
the bevel at the rear end of the
seat cushion. It is visible when the
lower part of the child seat trim
cover is pressed. After the child
seat is removed, the upper part of
its cover needs to be pressed to
return the cover.
2. Open the anchor support cover.
25
01
SAFETY
To Next Page
Loading...
