EasyManua.ls Logo

BYD Seal 2024 - Page 86

BYD Seal 2024
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Charging time: Refer to the charging
time message on the instrument
cluster.
WARNING
See "Charging Instructions" for
charging safety warnings.
The highest working temperature
allowed for the charging
equipment is 50°C. Store the
product in a cool and dry place
when it is not in use.
When charging, do not place the
equipment in the trunk, under the
front of the vehicle, or near the
tires.
When using the equipment,
prevent it from getting rolled
over by the vehicle, dropped, or
trampled on.
It is not recommended to use
any additional wire or adapter/
connector. If an additional
adapter is required, choose
a suitable cable diameter
(≥1.5 mm²) and the adapter/
connector parameters must meet
requirements.
Never use the charging equipment
if the household power strip cable
becomes soft, if the charging
connector cable is worn out, if the
insulation layer is cracked, or in
case of any other damage.
Never use the equipment
when the charging connector,
power plug, or power strip is
disconnected or broken, or if there
is any sign of surface damage.
To prevent failure of the charge
port door, do not open and close
it repeatedly. The recommended
time interval for opening and
WARNING
closing the port door is at least
one second.
CAUTION
The charging cable must not be
placed in a spiral during charging,
as this will affect heat dissipation.
See the charging instructions for
specific charging precautions.
REMINDER
It is recommended to contact a
BYD authorized dealer or service
provider or local electrician to
select an appropriate power
supply according to requirements
of the charging equipment.
Charging equipment grounding
instructions: The equipment must
be properly grounded. In the
event of failure or damage to the
equipment, the grounding cable
provides a minimum impedance
to circuit discharge and thereby
reducing the risk of electric shock.
The equipment comes with a
ground cable connecting its
ground point with that of the
power plug, which must match
a properly installed and well-
grounded power supply outlet.
2. Charging
With the vehicle doors unlocked and
preferably powered off, press the
charge port door to open it.
85
04
USING AND DRIVING

Table of Contents

Related product manuals