●
Open the vehicle charge port cap,
and make sure that no obstacles exist
between the head of the charging
connector and the end of the charging
socket.
REMINDER
●
Do not open the charge port door
forcibly when it is locked.
●
If the charge port door is frozen
due to weather or other reasons,
it is suggested to warm it with hot
water and then open the port, do
not force it open.
●
Connect the power supply terminal:
●
Plug the EV Mode 2 charging cable
into a household socket.
●
Connect the vehicle port:
●
Plug the charging connector correctly
into the port.
●
After the charging connector is
inserted, the charging connection
indicator
lights up on the
instrument cluster.
REMINDER
●
Do not forcibly insert the
connector with the electric lock
engaged.
●
In the charging process, charging
parameters and the charging sign are
displayed on the instrument cluster.
●
At this point, you can schedule
charging on the infotainment
touchscreen. See
P89
for the
configuration process.
REMINDER
●
During charging, the estimated
remaining time to full
charge is displayed on
the instrument cluster or
infotainment touchscreen. It is
normal that the remaining time
to full charge may vary slightly,
depending on the temperatures,
SOC, and charging facilities.
●
Reservation charging cannot be
used when the battery is too low.
3. Stopping charging
●
End the charging:
●
The charging automatically ends
when the vehicle is fully charged.
●
Press the unlock button on the
smart key or press the door handle
microswitch (while carrying the
smart key), then the vehicle will stop
charging.*
●
Disconnect the charge port:
●
If the anti-theft lock is deactivated,
press the mechanical button of the
charging connector or pull out the
charging connector as needed.
86
To Next Page
Loading...
