Remote Start Function*
Remote Starting
●
Press and hold the start/stop button
on the smart key to start the vehicle.
After the vehicle is started successfully,
the turn signals ash 3 times.
●
After the successful start, press and
hold the start/stop button on the smart
key to shut down the engine and
power o the vehicle, and the turn
signals ash twice.
Gearshift control panel
Gear positions are marked on the
gearshift panel, as indicated by the gure.
●
"R": Reverse, used only when the
vehicle has come to a complete stop.
●
"N": Neutral. Use it for temporary
parking or towing. However, the driver
must ensure that the transmission is
shifted to P before leaving the vehicle.
●
"D": "D": Drive. Use it for normal
driving.
●
"P": Park. Press the P gear button
to park the vehicle. The transmission
should be set to this position when the
vehicle is being shut down or started
up. By pressing the brake pedal to start
the vehicle, you can shift from Park to
another position.
●
If the shift is successful, the lever
returns to its middle position after it is
released.
The transmission can be shifted to D/R
only when the ignition is on.
Press the brake pedal to shift out of P or
to D/R.
CAUTION
●
To ensure safety, depress the
brake pedal before shifting out of
P gear and shifting into R gear.
●
To avoid damaging the
transmission, press the P gear
button only after the vehicle has
come to a complete stop.
129
04
USING AND DRIVING
To Next Page
Loading...
