EasyManua.ls Logo

BYD SEAL U DM-i - Exterior Cleaning

BYD SEAL U DM-i
260 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAUTION
When the vehicle is repainted
and placed in a high-temperature
paint waxing workshop, the
vehicle's plastic bumper must be
removed to avoid damage caused
by high temperatures.
Exterior Cleaning
The vehicle must be cleaned in time
under the following circumstances,
which can cause peeling of paint layer
or corrosion of the vehicle body and
parts:
Driving along the coast.
Driving on a road with anti-freeze.
Driving on roads covered with coal
tar.
Resin, bird droppings, or insect
carcasses are stuck on the vehicle.
Driving in areas with a large amount
of smoke, soot, dust, iron 󽗉lings, or
chemicals.
The vehicle is visibly soiled by dust or
mud.
After raining.
Washing Vehicle Manually
Before washing the vehicle, park it in the
shade, and wait for the vehicle to cool
down su󽗋ciently.
1. Hose o󽗈 loose dirt, including all muds
or road salts at the bottom of the
vehicle and on wheel pits.
2. Wash the vehicle with neutral agents,
the mixing of which should be carried
out according to the manufacturer's
instructions. Soak a soft cloth with
cleaning solution and gently wipe it
down along the direction of the water
󽗊ow. Do not wipe in a circular motion
or horizontally.
3. Rinse thoroughly. Otherwise, the
washing agent results in stripes after
air drying. After washing the vehicle in
hot weather, rinse all parts properly.
4. Dry the vehicle with a clean soft towel
to prevent stay water marks. In order
to prevent scratching, do not rub or
apply excessive force on the paint.
REMINDER
Do not use strongly alkaline
washing powder, soapy water,
detergents, de-waxing detergents,
or organic matters (petrol,
kerosene, volatile oil, or strong
solvent) to clean the vehicle.
When cleaning the combination
lights, do not wipe their
surface with chemical solvents
such as petrol, alcohol, lacquer
thinner, thinner and carbon
tetrachloride. Doing so will cause
the combination light casings to
crack.
It is recommended that vehicles
travelling in coastal or heavily
polluted areas be washed once a
day.
Do not use blades or petrol to
remove hard dirt from the vehicle
body. The plastic wheel trim is
easily damaged by organic matter.
If any organic matter splashes on
the vehicle trim, remove it with
water and check whether the trim
is damaged. Please replace any
seriously damaged plastic wheel
trim in time. Otherwise, the trim
may fall from the wheel during
vehicle movement and cause an
accident.
203
06
MAINTENANCE

Table of Contents

Related product manuals