BYD SEAL U DM-i - Tyres Maintenance

or foreign bodies on the windscreen
surface.
●
Do not wax the windscreen when
washing the vehicle and maintaining
the body paint, as the wax
layer re󽗊ects light in poor light,
consequently a󽗈ecting the sight and
driving safety. After washing the
vehicle, rinse the blade with plain
water, and use special windscreen wax
cleaner to remove the wax layer on the
windscreen.
●
Do not wash the wiper blade directly
with a water gun to prevent damage to
the wiper blade due to excessive water
pressure.
Maintenance Rules
●
Clean windscreen and blade regularly
(preferably once a week or once every
two weeks).
●
Even if there is no rain, it is
recommended to wipe regularly (once
every day or once every two days).
●
Keep the windscreen fully wet when
wiping with wiper blades (when it
is not raining, the washer 󽗊uid must
be sprayed on the windscreen in
advance).
●
Clean the windscreen with a special
windscreen washer 󽗊uid.
●
Promptly clean mud and insect
carcasses stuck to the windscreen with
a rag.
●
Maintain the windscreen in time in
case of scratches by gravel knocking (it
is recommended to use resin products
for the windscreen repair, and replace
the windscreen in case of many or
excessive scratches).
●
Replace the wiper blades regularly,
preferably once every six months.
●
Lift the wiper arms up prior to cleaning
the windscreen.
Tyres Maintenance
●
For safe driving, tyres must be made
and sized to 󽗉t the vehicle, with good
tread and standard tyre pressure.
●
The following pages provide details on
how to check tyre pressure, damage to
and wear of tyres, and the operating
method for tyre transposition.
WARNING
●
Using tyres with excessive wear
or insu󽗋cient/excessive pressure
can result in accidents, severe
injury, or death.
●
Please follow all instructions
in this manual regarding tyre
in󽗊ation and maintenance.
Tyre In󽗊ation
●
Keep tyres properly in󽗊ated to
provide the best combination of
maneuverability, tread life, and driving
comfort.
●
Driving with underin󽗊ated tyres
leads to uneven tyre wear,
a󽗈ect maneuverability and power
consumption, and even may cause air
leakage due to overheating.
●
Over-in󽗊ated tyres reduce riding
comfort and are prone to damage from
uneven roads. In severe cases, the risk
of tyre bursting poses severe threats
to the safety of the entire vehicle. Over-
in󽗊ation will also cause uneven wear
and tear of tyres, a󽗈ecting tyre service
life.
●
The vehicle is equipped with a tyre
pressure monitoring device. In a cold
state, you decide whether to in󽗊ate the
213
06
MAINTENANCE