●
Pad the front wiper arm with a folded
towel or cloth to keep it out of contact
with the windscreen.
●
To reduce sticking, spray silicone
lubricant on the sealing parts of all
doors and the boot lid, and apply
vehicle body wax on the paint surface
where the sealing strips of doors and
boot lid contact.
●
Cover the vehicle body with a
breathable covering made of a "porous
material", such as cotton. Non-porous
materials, such as plastic sheeting, can
build up moisture and damage the
paint.
REMINDER
●
Before transportation or storage,
it is recommended that SOC
is kept over 50% to ensure
the performance of the high-
voltage battery and normal power
supply of the 12V battery during
transportation or storage.
Bonnet
Opening the hood
1. Shift to P or N gear, and engage the
EPB. Open the door, and pull up the
hood opening handle on the right side
of the lower body of the dashboard for
2 consecutive times to slightly open
the hood.
2. Open the hood and lift it up. The hood
automatically rises to open.
Closing the hood
1.
Pull the hood downward to make
its lock ring contact with the front
compartment lock. Place both hands
in the area shown in the gure in the
front of the hood, and then press down
hard to completely lock the hood.
2. After closing the bonnet, check
whether the latch is securely locked.
REMINDER
●
Ensure that the hood is
closed and locked rmly before
driving. Otherwise, the hood may
suddenly open during driving,
resulting in an accident.
Cooling System
Low-temperature expansion tank
2WD
209
06
MAINTENANCE
To Next Page
Loading...
