EasyManua.ls Logo

BYD SEAL U DM-i - Maintenance Information

BYD SEAL U DM-i
260 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
Information
Maintenance Cycle and
Items
Maintenance Plan
The maintenance plan is designed to
ensure stable driving, failure reduction,
safe and economical driving.
For the planned maintenance interval,
refer to the maintenance timetable
depending on the reading of the
milometer or the time interval,
whichever comes 󽗉rst.
For overdue maintenance items, the
same time interval should be used for
maintenance.
Rubber hoses (for cooling and heating
systems, braking systems, etc.) should
be checked by professional technicians
according to the maintenance
timetable.
These are particularly important
maintenance items whose
maintenance intervals are recorded in
the maintenance timetable. Hoses with
any degradation or damage should be
replaced immediately.
The maintenance timetable lists all the
maintenance items that are necessary
to keep the vehicle in optimum
condition at all times.
Maintenance Timetable Requirements
The vehicle must be maintained
according to the regular maintenance
timetable.
If the vehicle is operated primarily
under one or more of the following
special conditions, certain maintenance
items may need to be performed more
frequently.
Road conditions
Muddy, sandy, or snowy roads
Dusty roads
Driving conditions
Use of towed trailer, camping trailer,
or roof rack
The vehicle is driven within 8km
(5miles) repeatedly and driven in
an environment with temperature
below zero.
The vehicle is driven in long-term
idling or low-speed long-distance
driving conditions. The examples
include police cars, taxis, or vehicles
carrying goods.
Maintenance Timetable
Regular Maintenance
Regular maintenance items include
vehicle basic maintenance, other
project maintenance and engine project
maintenance.
Vehicle basic maintenance: The following
maintenance time and maintenance
mileage (total mileage) shall be carried
out, whichever comes 󽗉rst.
Items Time and mileage interval for maintenance
Check whether the cooling water pipe
is intact and tightly locked at the
connecting parts
Every 12 months or 15,000 km (9,300miles)
198

Table of Contents

Related product manuals