9
General
Description
Section 1: General Description
Lock Levels
Lock levels are used to limit patient access to certain programming and
operating functions. e table on the next page lists the functions that
are accessible in Lock Level 0 (LL0), Lock Level 1 (LL1), and Lock Level 2
(LL2). When a function is accessible, the key associated with the function
beeps when pressed. If a function is not accessible, the pump ignores the
key press and a beep does not sound. Section 2, Pump Setup and Pro-
gramming, describes how to change the lock level.
Security Codes
e following security codes are preset by the manufacturer for the
clinician’s use:
** Text Omitted from Online Version **
WARNING: Do not disclose to the patient the pump’s security
codes or any other information that would allow the patient com-
plete access to all programming and operating functions. Improper
programming could result in death or serious injury to the patient.
To Next Page
