EasyManua.ls Logo

CADD Legacy Plus 6500 - Cleaning Pump and Accessories

CADD Legacy Plus 6500
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53
Reference
Section 5: Reference
Cleaning the Pump and Accessories
CAUTION:
Do not immerse the pump in cleaning uid or water. Do not allow
solution to soak into the pump, accumulate on the keypad, or enter
the battery compartment. Moisture build-up inside the pump may
damage the pump.
Do not clean the pump with acetone, other plastic solvents, or abra-
sive cleaners, as damage to the pump may occur.
Routinely clean the pump to keep it free of dirt, liquids, and foreign
objects.
Use any of the following solutions to clean the pump and accessories:
Soap solution
Benzalkonium Chloride concentrate (0.13%)
Glutaral Concentrate, USP (2%)
10 % solution of household bleach (one part household bleach to
9 parts water)
Alcohol, USP (93%)
Isopropyl Alcohol, USP (99%)
Chlorohexidine (70%)
PDI — Super Sani-Cloth®
Mada Medical — MadaCide
1. Dampen a so, lint-free cloth with cleaning solution and wipe the
exterior surface of the pump. Do not allow the solution to soak
into the pump.
2. Wipe the entire surface dry with another so, lint-free cloth. Allow
the pump to dry completely before use.

Table of Contents

Related product manuals