Section 2: Pump Setup and Programming
Pump Setup &
Programming
36
6. If the Air Detector is in use, go to the next section. If not, connect
the tubing to the patient’s infusion set or indwelling catheter and
go to Setting the Lock Level for the Patient.
WARNING: Ensure that the entire uid path is free of all air bub-
bles before connecting to the patient to prevent air embolism. Air
embolism could result in death or serious injury to the patient.
NOTE: If the uid path contains an air eliminating lter, it is
acceptable for air bubbles to be present on the vent side of the lter.
To Next Page
Loading...
