Section 2: Pump Setup and Programming
Pump Setup &
Programming
38
3. To seat the tubing into the groove, gently pull the tubing, until it is
under the retention nubs and at in the groove.
4. Connect the tubing to the patient’s infusion set or indwelling
catheter.
WARNING: Ensure that the entire uid path is free of all air
bubbles before connecting to the patient to prevent air embo-
lism. Air embolism could result in death or serious injury to the
patient.
NOTE: If the uid path contains an air eliminating lter, it is ac-
ceptable for air bubbles to be present on the vent side of the lter.
Retention
nubs
To Next Page
