©2020 CAE 905K351052 v1.1 11
Specifications
Air Supply
To properly regulate psi, the optional wall air kit must be used in conjunction with the facility supply
source and facility wall adapter. The wall air kit is an additional optional accessory. When using a CAE
External Air kit in conjunction with a supply source at a facility, it is recommended that the facility air
supply be 30-psi to 60-psi (2-bar to 4-bar). The source should be clean, dry air.
CO
2
Supply
Apollo pre-hospital simulator will have four CO
2
cartridges included in the shipment. When using
the optional CAE External CO
2
Kit in conjunction with the facility CO
2
source and adapter, the
recommended pressure is 30-psi to 60-psi (2-bar to 4-bar).
To Next Page
Loading...
