EasyManua.ls Logo

CAE Apollo - Storage; Short-Term Storage

CAE Apollo
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
©2020 CAE 905K351052 v1.1 79
Care and Maintenance
Storage
Important: Do not attempt to open or repair any simulator components. Doing so may void the
warranty. If damage exists, contact CAE Customer Service immediately for a repair. Prompt repair
prevents expansion of the damaged area.
Prior to storing the product:
Make certain all fluids have been drained from the manikin.
Charge the manikin batteries.
Store all equipment and the manikin:
Indoors
In a dry location
Protected from dust
Away from direct sunlight
Within the temperature ranges listed in the Specifications section of this user guide.
Refer to the following short-term and long-term storage instructions for additional details.
Short-Term Storage
Follow these guidelines for short-term storage (less than two months):
Store the manikin on a work table and cover with a sheet.
For battery longevity, adhere to this storage guidance:
º Keep the simulator plugged in between training sessions due to a slow drain of the
battery that occurs.
º Under normal circumstances, unplugging the external DC power used for powering
and charging the simulator is not necessary because the charging stops when the
battery is full. A topping charge is only applied when the battery voltage drops to a
certain level.
º Keep the simulator and battery in a cool location to extend the life and capacity of the
battery both in storage and during use.

Table of Contents

Related product manuals