CAE Apollo - Blood Pressure

To Next Page

To Previous Page

Using Apollo

Blood Pressure

Apollo supports non-invasive blood pressure measurements, and systolic and diastolic readings can

be obtained and manipulated through the software.

Systolic and Diastolic Blood Pressure

To manually adjust the systolic and/or diastolic blood pressure:

1. From the Cardiovascular panel, select the parameter of desired blood pressure.

2. Set the pressure by moving the blue slider left or right, or by typing in a

value.

3. Select Accept to exit and save the changes. The switch is now orange,

indicating a change has been made.

4. If using CAE Physiology (optional), return to the programmed physiologic

model by selecting the switch and turning the Override switch to

Modeled.

Non-Invasive Blood Pressure Measurement

Blood pressure can be taken manually on either arm. Non-invasive blood pressure (NIBP) monitoring

techniques can be used by attaching the standard cuff modified with a T-fitting and adapters.

For information on attaching the NIBP arm and modifying the blood pressure cuff, see the Setup

section in this user guide.

To get a blood pressure reading:

Related product manuals