CAE Aria - Power and Communication Specs

©2021 CAE 905K690052 v1.0 9
Specifications
Power
Communications
Item Description
Power Adapter • AC Voltage Input: 85 - 264 VAC
• Nominal DC Output: 20 V
• Maximum DC Current Output: 8 A
• Nominal Power (Watts): 160 W
• Batteries Limited Charging Current: 4 A
Manikin/
Simulator
• Internal Batteries (14.4 V x 2)
• Charger DC Output: 19.5 V
• Charger Maximum Current Output: 8 A
• Charger Typical Current Output: 5.5 A
• Batteries Nominal DC Output: 14.4 V
• Batteries Minimum DC Output: 12.5 V
• Batteries Maximum Current Output: 12 A
• Batteries Typical Current Output: 5.5 A
• Run Time: 4+ hours (typical with fully charged battery)
• Both batteries discharge together at the same rate
StethoSym • Run Time: 2 hr 45 min while constantly reading a RFID tag and playing
audio; 4 hours when ON and receiving signal (Sleep Mode)
• Recharge time: 50 minutes
SymDefib • Run Time: 17 hours (with Pads not on Manikin)
• 2-3 hours (with Pads on Manikin)
Tablet • Power Adapter AC Input: 100-240 VAC, 50/60 Hz, 11 W (34 W charging)
• Power Adapter DC Output; 15 V
• Power Adapter Power Output: 24 W
• Power Adapter DC Current Output: 1.6 A
• Battery Typical Output Voltage: 7.66 V
• Battery Capacity: 26.81 W hours
• Run Time: 5 hours (typical)
• Recharge Time: (4 hours (typical - while in use)
Item Description
Simulator Network,
Instructor Tablet,
Patient Monitor
• Wireless: IEEE 802.11 g
• Security: WPA2
• Bands Available: 2.4 GHz and 5.0 GHz
WiFi Modules -
StethoSym, SymDefib
• Wireless: IEEE 802.15.4 WPAN, Personal Area Network