CAE Aria - Eye Simulation (SymEyes)

©2021 CAE 905K690052 v1.0 41
Using Aria
Eyes
SymEyes
The simulator comes equipped with CAE SymEyes
TM
.
The blink mode, light reactivity, pupil diameter and blink speed of the simulator’s eyes can be
controlled from the software.
From the Run Screen, tap on the eyes or Eyes button to open the Eyes state screen.
Eye states can be adjusted from the Eyes state menu by tapping the drop-boxes for the following eye
states:
• Blink Speed: Normal, Slow, Fast, Rapid
• Blink Mode: Closed, Blinking
• Light Reactivity: Brisk, Sluggish, None
• Pupil Diameter: 2 - 6 mm
Note: Both eyes can be controlled together by tapping on the Control Eyes Together box.
The following eye states can also be turned on or off (Default: Off):
• Normal
• Jaundice
• Bloodshot
• Hemorrhage (Both, or Right only)
• Keyhole Pupil
• Droopy Eyelids
• Cataracts
Panning and Consensual Pupil Response can be toggled on or off (Default: On).
Eye Brightness can also be controlled in the Eyes state screen.