CAE Aria - Electrical Therapy and Pacing

Using Aria
66 ©2021 CAE 905K690052 v1.0
CAEAria
Connecting the ECG to a Patient Monitor
A standard patient monitor can be used to connect to the manikin’s ECG power plug. Simply connect
the manikin’s ECG connector to the monitor’s connector.
Connecting the ECG to a Patient Monitor
Defibrillation, Cardioversion, and Pacing
Aria supports cardioversion, defibrillation, and pacing.
The manikin can receive simulated electrical therapy through the software or by using the SymDefib
device with a live defibrillator. The SymDefib is included with the Advanced configuration and can be
added to the Live configuration.
Simulated Defibrillation
For instructions on administering defibrillation through the software, refer to the Maestro for Aria
User Guide.
Commercial Defibrillation
The manikin is designed to safely absorb the energy discharged from commercial defibrillators
through the SymDefib.
Safety Precautions
Standard defibrillation energy levels should be used for positive learning reinforcement and to avoid
negative training transfer. However, please refer to the following cautions.