CAE Aria - Step 2: Connect the Manikin Power Cord to Aria; Step 3: Connect the Manikin Power Cord to a Power Source

Setup
24 ©2021 CAE 905K690052 v1.0
CAEAria
Step 2: Connect the Manikin Power Cord to Aria
Remove the manikin power cord from the shipping container. Align the pins of the manikin power
cord to the black power connection located at the manikin’s buttocks.
Manikin Power Cord Pin Alignment
Plug in the manikin power cord to the black power connection.
Power Cord Connected to Aria
Step 3: Connect the Manikin Power Cord to a Power
Source
With the manikin power cord plugged in to the black power connection located at the manikin’s
buttocks, plug the other end of the power cord into a power source.