©2021 CAE 905K690052 v1.0 23
Setup
Step 1: Place the Aria Manikin in the Work Area
Select a work area with enough space for all equipment and to easily access and move around the
manikin. A minimum of 2 ft x 4 ft (61 cm x 122cm) work area is recommended.
Before placing the manikin on a surface, make sure it can support a minimum of 50 lbs (22.7 kg).
IMPORTANT: Never lift the manikin by the limbs. Support the manikin’s head and lift it from the
torso.
Note: Live and Advanced configurations support wireless use of the Instructor tablet. When working
with these configurations, ensure a multi-plug AC power outlet is located close to the workspace to
recharge powered components.
The Aria manikin comes preasssembled. It is recommended that two persons lift and move the
manikin to the work area to avoid damage to the manikin.
Place the desired genitalia, wig, and gown on the manikin (all included with the manikin).
The manikin includes male and female interchangeable genitalia and wigs. See the Using Aria section
of this user guide for instructions on how to change the genitalia.
Aria Placed in Work Area
To Next Page
Loading...
