Using Aria
78 ©2021 CAE 905K690052 v1.0
CAEAria
Urinary Catheterization
Prior to catheterizing the simulator, the genitourinary (GU) system must be primed. See the Setup
section of this user guide for instructions.
To perform catheterization, use the following items:
• 10 Fr 3 ml balloon urinary catheter
• Syringe to inflate catheter balloon
• Silicone oil spray (included)
Inserting a Urinary Catheter
Note: Before catherization, see the Setup section of this user guide for instructions on how to prime
the genitourinary (GU) system.
After the GU system has been primed, catheterize the simulator using a standard 10 Fr urinary
catheter lubricated with silicone oil spray.
When the catheter is inserted, simulated urine begins to flow until the internal bladder is empty.
Note: The urinary catheter must be inserted approximately 2.5 inches (6.35 cm) for the female
genitalia and 4.5 inches (11.43 cm) for the male genitalia to achieve urine flow.
Urinary Catherization
Changing the Simulator’s Genitalia
Aria comes with male and female genitalia.
Note: Prop the manikin’s buttocks up with a pillow or folded sheet/towel to allow for easier access to
the manikin’s genitalia.
To Next Page
Loading...
