Caen NIM8304 - Fan Tray Local Programming; List of Menu Functions

Document type:
Title:
Revision date:
Revision:
User's Manual (MUT)
Mod. NIM8304 12 slot 7U(5+2) Switching NIM Crate
14/04/2014
3
NPO:
Filename:
Number of pages:
Page:
00121/09:N8304.MUTx/03
NIM8304_REV3.DOC
44
32
5.5 FAN Tray Local programming
The Crate can be controlled via various menu on the OLED display, which is enabled via:
- Crate turning on via local switch
- Crate turning on via remote interface
The display is disabled only via local switch crate off.
5.5.1 List of menu functions
The following menu are available:
 ±6 V, ±12 V, ±24 V Monitor
• allows to set: Vset, Iset, UVP (% Vset), OVP (% Vset)
 ALARM
 GENERAL
• Power Supply
• COMM
o RS 232
o CAN bus
o ETHERNET
Menu 1..9 re displayed by pulling UP/DOWN the 4-directional Switch with Center Push
and are the following: