Instruction Manual, November 2016 Page 1
Table of content
1. Introduction 2
1.1. CAMAG ADC2 2
1.2. Precautions 2
1.3. Parts supplied 5
1.4. Options 5
1.5. Spare parts 5
2. Installation 6
2.1. Instrument 6
2.2. Installation environment 7
2.3. Conditions for the installation 8
2.4. Mains connection 9
2.5. Connection to the PC 9
2.6. Mounting the exhaust tube 9
3. Getting started 11
3.1. Automatic instrument monitoring 11
3.2. Checking system functions 11
4. Manual operation 12
4.1. HPTLC plate / plate holder / foil holder 12
4.2. Drying module and plate lift 13
4.3. Positioning of Twin Trough Chamber 14
4.4. Developing and preconditioning solvent 15
4.5. Display and function of keys 16
5. Stand-Alone operation 18
5.1. Aborting an application in progress 19
5.2. Resetting the instrument 19
6. Display texts and diagrams 20
6.1. Texts and their meaning 20
6.2. The Normal operation mode dialog 21
6.3. The method stack dialog 22
6.4. The Dialog mode 23
6.5. The Parameters Input dialog 24
6.6. The Manual functions dialog 25
6.7. The Setup dialog 26
6.8. Error messages 27
7. Maintenance and trouble shooting 28
7.1. Cleaning 28
7.2. Decontamination 28
7.3. General maintenance 28
7.4. The Setup dialog 29
7.2.1. Set baud rate 29
7.2.2. Set display language 30
7.2.3. Set the LCD contrast 30
7.5. Replacing fuses 31
7.6. Maintenance Data Sheet 32
8. Technical data 32
Appendix A Option Humidity Control (022.8360) 33
1. General / saturated salt solution 33
2. Installation 34
3. Humidity control preparations 37
4. Preparation of molecular sieve 37
5. Humidity values in practice 38
6. Additional measurement values 39
To Next Page
Loading...
