CAMAG ADC 2 - Maintenance Data Sheet

ADC 2
Instruction Manual, November 2016 Page 32
7.6. Maintenance Data Sheet
CAMAG Maintenance data sheet
ADC 2
April 2015/UB
Purpose
The maintenance data sheet informs about maintenance interval of the respective
instrument as well as the proposal for IQ/OQ interval if applicable. In addition, it
identifies consumable parts with the respective replacement cycle.
Maintenance interval
Maintenance
12 Months
IQ/OQ
12 Months
Consumable parts
Part No.
Description
Replacement cycle
237.0013
Temperature and humidity sensor
36 Month
Salt/Solution in humidity control tank
12 Month
022.8370
Saturation pad (100pcs)
Upon need
022.8375
Filter for humidity control tank (10 pcs)
12 Month
8. Technical data
Main power
connections
100 – 240 V; 50 / 60 Hz; 20 W
Drying module drive Stepper motor 1600 steps/rev., 160 steps = 0.1mm
Positioning with acceleration ramp
Lift drive Stepper motor 1600 steps/rev, 5 steps = 0.1mm
Positioning with acceleration ramp
In- output connection
RS232
Dimensions Width 330mm, depth 330mm, height 520mm
Weight 18.5 kg