Instruction Manual, November 2016 Page 19
Procedure for local delete of a saved method:
Press the RUN key.
The most recently used method is displayed. With the or
key you can select the locally stored method to delete.
Press the key combination RUN-END (press and hold RUN,
then press END) and confirm deleting with ENTER.
Flow diagrams for these dialogs are depicted in chapter 6.
5.1. Aborting an application in progress
Procedure:
Press the END key
The development in progress is aborted and if the plate was
immersed in solvent, a drying process will follow. An aborted
development cannot be continued.
5.2. Resetting the instrument
Procedure:
Press the RESET key
This will abort all activities in progress and re-initialize the in-
strument.
To Next Page
Loading...
