cnPilot Enterprise AP User Guide CAMBIUM NETWORKS
5. Unconnected Clients: Unconnected clients provides a list of clients that could not
connect properly due to various reasons, with the access points. Currently the following
failures are tracked:
Invalid pre-shared key
EAP authentication failure
Denied due to MAC ACL
Radius server not reachable
No radius server found
Client disconnected by enhanced-roaming
Denied association by enhanced-roaming
Use the following CLI to display the list of wireless clients unconnected:
(cnPilot Enterprise AP) (config# show wireless unconnected clients
Figure 28: Unconnected Clients
To Next Page
Loading...
