CAME FROG-P KIT

END OF INSTALLATION
STAGE 1
BEFORE STARTING STAGE 2 - Wiring & Electrical
PLEASE CHECK THAT YOU HAVE CORRECTLY:
Ref Page
1. INSTALLED THE FOUNDATION CASING 1.1 3
2. PREPARED THE CABLING CORRECTLY 1.2 4
1.3 4
3. INSTALLED THE MOTORS CORRECTLY 1.4 5
4. HUNG THE GATES CORRECTLY 1.5 5
5. CHECKED THE MANUAL RELEASE
SYSTEM 1.6 6
NOW STAGE 1 IS FULLY COMPLETED YOU ARE READY TO
BEGIN STAGE 2 OF YOUR FROG AUTOMATION KIT
INSTALLATION
7