MAINTENANCE PROCEDURES
tmo2016-010-151_a
1. Adjustment screw
Taillight Bulbs Replacement
The taillights are built with LEDs (light
emitting diode) and this technology
proved to be reliable. In the unlikely
event they do not work, have them
checked by an authorized Can-Am
dealer, a repair shop or p erson of your
choosing.
Drive Shaft Boot and
Protector
Drive Shaft Boot and Protector
Inspection
Visually inspect drive shaft protectors
and boots condition.
Check protectors for damage or rub-
bing against shafts.
Check boots for cracks, tears, leaking
grease, etc.
Repair or replace damaged parts as
necessary.
tmo2016-010-153_a
FRONT OF VEHICLE
1. Inner drive shaft boots
tmo2016-010-053_a
FRONT OF VEHICLE
1. Outer drive shaft boot
tmo2016-010-045_a
REAR OF VEHICLE
1. Inner drive shaft boots
tmo2016-010-046_a
REAR OF VEHICLE
1. Outer drive shaft boot
Propeller S haft Boot (HD5)
Visually inspect the propeller shaft
boot for cracks, tears, leaking grease,
etc.
______________
123
To Next Page
Loading...
Need help?
General