SECONDARY CONTROLS
The differential switch enables locking
of rear differential.
NOTICE
The vehicle must be
stopped to engage or disengage
the differential switch. Mechanical
damage may occur if switch is en-
gaged or disengaged while driving.
The rear differential is locked when
the switch is pushed upwards. The
rear differential is unlocked when the
switch is pushed downwards.
5) ECO/Normal/Work Mode
Switch (If Equipped)
The ECO/normal/work mode switch is
located on the upper console.
It is used to select the ECO, n orm al or
work mode.
NOTE: The cluster will show the se-
lected driving mode.
tmo2016-010-066_d
1. ECO/normal/work mo de switch
The ECO (fuel economy mode) setting
reduces fuel consumption by limit-
ing throttle response and maxim um
throttle opening to maintain an optimal
cruising setting.
NOTE: Use ECO mode on bumpy
trails to provide smoother ride con -
ditions.
The normal mode offers no engine
torque reduction as well as a sportier
driving experience
The work m ode is optimized to be able
to work with high loads in a smooth
way but still with the full engine t
orque
available. This mod e is also effective
for getting over obstacles and rough
terrain.
6) Winch Switch (If
Equipped)
The winch can be controlled from in-
side and outside the vehicle with the
winch control s witch located in the up-
per console.
tmo2016-010-066_e
1. Winch switch
Refertoyourwinch
GUIDE
included
with your vehicle for proper winch op-
eration.
54
______________
To Next Page
Loading...
Need help?
General