MULTIFUNCTION GAUGE (ANALOG/DIGITAL)
Gauge Setup
Setting Metric/Imperial Units
See a Can-Am d ea ler for setting.
Setting Clock
1. Press SET (S) button to select clock
display.
2. Push and hold SET (S) button for
three seconds.
3. Press SET (S) button to select 12:00
AM PM or 24:00 time base.
4. If 12:00 AM PM time base is se-
lected, A or P flashes. Press SET (S)
button to select A (AM) or P (PM).
5. Press SET (S) button to change
hours.
6. PressS(S)buttontoswitchtomin-
utes (minutes flash).
7. Press SET (S) button to chang e min-
utes.
8. Press S (S) button.
Setting Language
The gauge display language can be
changed. Refer to an authorized
Can-Am dealer for language availability
and setup the g au ge to your prefer-
ence.
_______________
65
To Next Page
Loading...
Need help?
General