Can-Am 2018 Defender Series User Manual

LIFTING AND SUPPORTING THE VEHICLE
FrontofVehicle
Placevehicleonaflatnonslippery
ground.
Ensure vehicle shift lever is set to
PARK.
Install an hydraulic jack under front skid
plate.
Lift front of vehicle and install a jack
standoneachsideunderframesec-
tion.
tmo2016-010-096_a
1. Front of vehicle
2. Frame section
Lower hydrau lic lift and e ns ure veh i-
cle is supported safely onto both jack
stands.
Rear of Vehicle
Placevehicleonaflatnonslippery
ground.
Activate 4WD mode.
Ensure vehicle shift lever is set to
PARK.
Install an hyd ra ulic jack under th e trailer
hitch.
Lift rear of vehicle and install a jack
standoneachsideunderframesec-
tion in front of rear wheel.
tmo2016-010-095_a
1. Lifting location under trailer hitch
2. Frame section to install jacks under.
Lower hydrau lic lift and e ns ure veh i-
cle is supported safely onto both jack
stands.
_______________
95

Can-Am 2018 Defender Series Specifications

General

Brand	Can-Am
Model	2018 Defender Series
Category	Automobile
Language	English