MULTIFUNCTION GAUGE (LCD)
3. If the 12-hour format was selected,
choose Am ("A ") or Pm ("P") by press-
ing button.
4. Press and HOLD button.
5. Choose hour first digit by pressing
button.
6. Press and HOLD button.
7. Choose hour second digit by press-
ing button.
8. Press and HOLD button.
9. Choose minutes first digit by press-
ing button.
10. Press and HOLD button.
11. Choose minutes second digit by
pressing button.
12. Press button to enter settings
(CLOCK will appear on display).
NOTE: The gauge will display the cur-
rent time for 10 seconds t hen will re-
turn to the n ormal display mode.
Unit Selection (km/h vs MPH)
The speedometer, odometer and trip
meter are factory pr eset i n miles but
it is possible to change them to kilo-
meter reading. Contact an authorized
Can-Am dealer.
Language Selection
The gauge display language can be
changed. Refer to an authorized
Can-Am dealer for language availability
and setup the g au ge to your prefer-
ence.
60
______________
To Next Page
Loading...
Need help?
General