59
E
Macintosh
Cautions:
• Make sure you observe the following precautions whenever an image is being
read from or written to the memory card (which is indicated when the
camcorder’s card access indicator is flashing). Failure to do so can cause
memory card data to become corrupted.
– Never remove the memory card or detach the USB cable.
– Never turn off the camcorder or computer.
• Do not format memory cards on a computer.
1.
Insert the memory card to the camcorder.
2.
Connect the camcorder to an AC outlet.
3.
Attach the supplied USB cable to the computer’s USB port and the
camcorder’s USB terminal. (
57)
4.
Set the camcorder to CARD PLAY(VCR) mode.
• The [CANON_DV] icon or the corresponding drive icon will appear on the
display.
5. Double-click the [Canon ImageBrowser] icon on the desktop.
• ImageBrowser will start.
• If the icon does not appear on the desktop, double-click the folder in which
you installed the program, followed by the [Canon Utilities] and
[ImageBrowser] folders and the [ImageBrowser] file.
Downloading Images to a Computer (ImageBrowser)
Explorer View Section
6.
Double-click the [DCIM] folder in the Explorer View Section.
• No image will be imported if you click [Canon Camera]. Make sure you
select [DCIM].
• The images from the memory card will display as thumbnails in the Camera
window (
60).
Canon ImageBrowser Icon
To Next Page
Loading...
