® A confirmation message will appear
on
the screen. Select
(""")
[YES] and press
(8
)to start the disc initialization.
• The disc initialization will take approximately one minute. Avoid moving the
camcorder while the operation is
in
progress.
•
You
can start recording movies once the record pause •
II
indication appears.
o The disc initialization screen may not appear automatically if you operated the
camcorder's buttons while the disc recognition was
in
progress.
In
that case,
initialize the disc using the menu option
(OJ
57).
o The process
of
recognizing a disc may take a moment. The @ display will
move while the disc
is
being read. Wait until the camcorder finishes recognizing
the disc before you start recording.
Removing
the
Disc
1.
Slide
fully
in
the
direction
of
the
arrow
and
gently
open
the
disc
cover
completely
until
it
stops.
. •
Do
not subject the camcorder to strong impacts while the DISC access indicator
is
on
or flashing.
• Retract the grip belt under the camcorder so it will not get
in
the way
of
the disc
cover.
• It may take a moment after pressing for the disc cover to open.
2.
Grab the edges
of
the
disc
and
gently
pull
it
out.
Be careful not to touch the recording surface of the disc or the pick up lens.
3.
Close the
disc
cover.
When you slide after making a recording, additional important data
is
recorded on the disc before the disc cover opens. While the DISC access indicator
is
on
or flashing do not subject the camcorder to shocks such as forcefully laying it
on
a table.
-
23
To Next Page
Loading...
